Moldex 0102 Qualitative Fit Test Kit - BITREX®

7640 comes pre-assembled but, unlike competitive models, they can be easily disassembled. This feature enables the user to replace either the filter or the cartridge or both as they become used up which helps to save money and reduces waste. With other brands, users are forced to discard the entire unit. Pre-assembled units save time and reduce the chance of error in selecting or assembling cartridge/filter combinations. Simply remove from the bag and attach to the respirator. The Moldex 7640 combo stacked cartridge/filters are useful in a variety of applications including petrochemical, ...

Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. For occupational use only, this test hood is designed to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter. This OSHA compliant protective face piece is ideal for fit testing and is compatible with the 3M™ Qualitative Fit Test Apparatus FT-10, FT-30 and the 3M™ Training and Fit Testing Case FT-20. Also suitable to be used with 3M™ Qualitative Fit Test Apparatus FT-10 and FT-30 and 3M™ Training and Fit Testing Case ...

Convenient cleaning and storage for full face and half mask respirators. Contains ninety ½ oz. packets of water-soluble cleaner, air bulb, bucket, brush, and 100 each sterile storage bags and seals, and large 17 quart, two-sided bucket. Kit meets OSHA recommendations.

Whether you're mixing and granulating compounds in a pharmaceutical facility or working with combustible gases in the oil and gas industry, 3M™ Versaflo™ The TR-800 motor/blower with TR-830 battery is intrinsically safe (IS) equipment is essential. Available in assemblies or ready-to-use kits with everything your team needs to get started. The 3M™ Versaflo™ Powered Air Purifying Respirator TR-800 Motor/Blower, with the 3M™ Battery Pack TR-830 attached, has been tested and classified for intrinsic safety in Hazardous Locations (Exia) by Underwriters Laboratory (UL) ...

Test pump pressure and cutoff of fuel oil pumps quickly and easily. No need to remove pump from oil burner. For use with all pumps of operating pressures up to 300 PSI. Use with vacuum gauge to analyze problems in oil lines caused by impurities, leaks or high restrictions. Quick hook-up fittings for easy testing. Accurately checks pressure, cutoff and vacuum under actual operating conditions. Liquid filled gauges for accurate readings. High pressure hoses for setting up today's higher pressure pumps. High impact case with handle. Complete with easy-to-follow instructions. Brass and high ...