Heskins Standard Black Anti Slip Tape, Glow In The Dark, 2" x 60'

Super Grade Glow-in-the-Dark Egress Tape provides high-performance visibility for emergencies and low-light situations. Photoluminescent brightness is measured in millicandelas per square meter (mcd/m²), with effectiveness ending at 0.32 mcd/m². The Super Grade tape takes approximately 450 minutes (7 hours) to reach this threshold after a full charge, making it a strong, reliable option for many safety applications. ASTM E2072 requires minimum luminance levels of 30 mcd/m² at 10 minutes and 4.4 mcd/m² at 60 minutes. The Super Grade tape significantly exceeds these regulatory standards, ...

Hazard Egress glow in the dark tape is perfect for lights out or dark/dimmed areas. The General purpose material is charged by natural light, and when the light dims the product instantly displays a bright light. It can be used for fire exits, handrails, stairways and marking traffic flow to exits. OSHA regulations require egress markings for all these applications.

Pipe Wrap Tape is a PVC plastic tape with a high tack adhesive that can be used on steel, galvanized, electrical conduit, cast iron pipe, and ductile iron pipe. Can be used above and below ground. Can be effective in all weather conditions. Provides corrosion protection, protects against fungus and bacteria, provides a dielectric barrier between the pipe and soil, and resists common chemicals and vapors. It is strongly recommended to use Black Swan Pipe Wrap Primer before applying tape. IAPMO approved.

Heskins conformable 36 Grit traction tape is perfect for applying onto an irregular surface such as diamond plate. If you have an irregular surface, you need a product that can cope with the intricacies of this demanding application. Diamond plate can be a very dangerous surface; it is potentially lethal when wet, creating a greater risk of slips. The levels of grip can also be very low; this is measured in Coefficient of Friction or (COF). Applying conventional tape does not work successfully, since the peaks and valleys result in stretching of the plastic film. Thus when applied into ...

Glow-in-the-dark directional tape is a chevron-patterned photoluminescent tape designed to help guide people safely in low-light or emergency situations. Its bright, long-lasting glow makes it ideal for marking exits, pathways, access routes, and egress points. The arrows on the tape provide clear direction, making it easier to navigate buildings during power outages or emergencies. This tape offers a balanced glow performance-stronger than standard egress tape but more cost-effective than premium options. When fully charged under normal lighting, it glows for about 4 to 6 hours. It's a ...