Kee Safety - L26-8 - Two Socket Cross 1.5 Inch Pipe Fitting, 1-1/2" Dia.

Kee Klamp® Fittings Corner Swivel Socket Complete combination fitting. Reducing combinations of Type C52 are available, sizes 5 to 8. For dimensions refer to Type F50 and Type M52.

Kee Klamp® Fittings Female Single Swivel Socket Member One part of a combination fitting. The Type F50, in size 4, has only one ear while Type F50, in sizes 5 through 9, has two ears. The distance between the ears on sizes 5 through 9 is 12.70mm or 1/2 inch. 3/8" diameter bolt hole.

Kee Klamp® Fittings Tee & Crossover Used on racking to join horizontal carrying rails to the upright, leaving the socket to take a horizontal tie across the section. For shelved racking it is usual to have the horizontal pipe outside the upright. On pallet racking it is preferable to have the carrying rails inside the upright.

Kee Klamp® Fittings Male Single Swivel Socket Member One part of a combination fitting. This can also be used for attaching flat panels to tubular structures. 3/8" diameter bolt hole.

KEE KLAMP® FITTINGS SINGLE SOCKET TEE Designed to give a 90 degree butt joint between two tubes. Frequently used for the joint between end uprights and the middle rail on guardrailing where the site is straight and level. Also for base ties on racking. This fitting cannot be used where the tubing through the sleeve 'A' is required to be joined within the Kee Lite fitting.