Valley Craft® 4-Wheel Aluminum Drum Truck, Molded Rubber Wheels, 1000 lb. Cap.

Easily transports 30 or 55 gallon steel, plastic or fiber drums. Removable handle is used to tilt drum for positioning on dolly and features a built in bung nut wrench and seal remover. The platform measures 24-3/4" x 16" to accommodate drums up to 24" diameter and has beveled front edge for easier drum loading. Two 6" x 2" rigid front wheels and one 3" x 1" swivel caster for easy maneuvering. Steel construction. US Patent 6682084.

NEW AGE ALUMINUM BOX TRUCK Transport Heavy Loads up to 2600 Lbs. Aluminum box truck is ideal for use in walk-in coolers and freezers to transport large loads of beef, stock or produce. Truck base is constructed of 1-½" x 2-¾" x .070" wall extruded aluminum tube with welded 1-½" x 1-½" x .070" wall tube lateral braces for strength. Upper shelf features 1-½" x 3-1/8" x .070" wall aluminum tube frame and 1-½" x 1-½" x .070" wall lateral tubes supported by 1-½" x 1-¾" x .070 wall extruded aluminum tube uprights welded securely to the base. Rolls smoothly with 6" x 2" polyurethane casters (2 ...

The Drainer is an original, exclusive OMAHA design - don't settle for look-alikes. It facilitates moving and dispensing of liquids from a 55 gallon drum into a 5 gallon container and at the same time provides the convenience and ease of operation of a 4 wheel drum truck. Drain height is 14". All double welded construction and heavy duty wheels with roller bearings and grease fittings assure long life. Unique rollers on the frame allow drum rotation without removing from the truck. Drum may be picked up from any side and the spigot can be rotated to bottom from any position. Specially ...

3-Wheel Dual Tapered Tilt Truck rolls on two axle-mounted wheels with ball bearings and one rear swivel caster with roller bearings. Truck is constructed of 14-ga. steel with leak-proof solid welds on the seams. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading. Hemmed lip around the top edge of the truck provides reinforcement with bulky loads, and steel handles aid in maneuvering trucks. Rolls on molded-on rubber wheels.

4-Wheel Dual Tapered Tilt Truck is constructed of 14-ga. steel with leak-proof solid welds on the seams for long-lasting, dependable service. The running gear consists of two fixed casters reinforced by steel tubing, and two swivel steering casters. Tapered ends allow tilt truck to adapt to virtually any material handling situation, and provide for safe and easy loading and unloading. Hemmed lip around the top edge of the truck provides reinforcement with bulky loads, and steel handles aid in maneuvering trucks. Rolls on molded-on wheels.