Use Verti-Karrier Drum Lifter hoist attachments to grab and lift your 55 gallon steel drum by gripping under the top rim. Then move and place your drum almost anywhere.
Load a drum to and from remote or hard-to-reach areas:
- Attach the Verti-Karrier drum grab to your hoist or crane
- Move drum picker and lower onto the top of drum
- As the drum grab is elevated it grips drum automatically under the top rim
- When the drum is lowered to the ground, the drum grab carriage drops down and automatically locks in the open position, releasing the load
- The Verti-Karrier drum grab is then ready to lift another drum:
Capacity: Lift a drum weighing up to 1,000 Lb. (454 kg).
Drum Lifter is sized for your 55 gallon (208 liter) steel drum. It has 3 different settings, and should be adjusted to grip the sidewall under the rim of your drum.
- Set in the top hole it will grip to 22-1/16" (56 cm) diameter drum
- Middle hole to 22-3/16" (56.4 cm) diameter
- Bottom hole to 22-7/16" (57 cm) diameter
Each Verti-Karrier below the hook Drum Lifter is load tested at the factory at 125% of rated capacity as per American National Standard ASME B30.20 and a load test certificate is enclosed with each unit. Morse Verti-Karrier Drum Lifters are NOT for a drum without lid or top in place.
- MADE IN THE USA
- 2 Year Warranty