Truss Head

#10-16 x 1-7/16 in. Phillips Flat-Head Screws With Wings provide secure metal-to-metal fastening with strong holding power. The screws feature sharp points and can be used where a flush appearance is needed. Features: Ideal for attaching plywood to metal from 20-12-gauge Steel construction Sharp self-piercing points are ideal for fastening corrugated roofing panels to wood structures Wings eliminate need to countersink wood Flat-head for flush appearance

6X3/8 Phillips Full Contour Truss Self Tapping Screw Type B Fully Threaded Black Oxide. Type B thread for molded or through holes in thin metal, non-ferrous castings. Truss head screws are weaker than pan or round heads but preferred in applications where minimal clearance exists above the head. Modified truss heads offer low clearance and an extra large bearing surface. Commonly used to attach metal lathe to metal studs.

8X1/4 Phillips Truss Thread Cutting Screw Type 25 Fully Threaded Zinc Bake. Thread-Cutting Type-25 screws provide excellent chip clearance. Steel: Used in molded or through holes in plastics and other soft materials. Stainless: Material into which the screw is to cut threads should have a lower hardness by 10-20 Rockwell hardness. Truss head screws are weaker than pan or round heads but preferred in applications where minimal clearance exists above the head. Modified truss heads offer low clearance and an extra large bearing surface. Commonly used to attach metal lathe to metal studs.

Teks roofing screws provide secure metal-to-wood fastening with strong holding power, without the need to pre-drill. Sharp self-piercing point is ideal for fastening corrugated roofing panels to wood structures. Self-sealing neoprene washer provides a waterproof seal and a premium finish provides exceptional corrosion resistance in harsh outdoor environments. Installs with a standard screwgun and a 1/4 in. hex drive bit.

4X3/8 #3 HD Phillips Truss High Low Screw Fully Threaded Zinc Bake. High-Low thread for use in plastic, nylon, wood or other low-density materials. Thread design reduces driving torques, enhances resistance to thread stripping, improves pullout strength and lessens the risk of cracking the work piece. Truss head screws are weaker than pan or round heads but preferred in applications where minimal clearance exists above the head. Modified truss heads offer low clearance and an extra large bearing surface. Commonly used to attach metal lathe to metal studs.