Variable Speed Controllers

Cross reference number: X13510636-01, BAYSENS006B The number of UCM-based BAS systems in significant, representing one of the largest single installed bases in the industry. Choose the SG155 Serieis and support this base with a wide variety of BAS sensors and controls from the BAS sensor expert. Comes with a 5 year limited warranty.

The A11 Series low temperature cutout controls incorporate a 20-foot long, vapor charged, sensing element. The A11 reacts to the coldest 18-inch section of the controls sensing element. The A11 is suitable for monitoring the face temperature of hot water coils for freeze protection. Features: Snap-acting switch External temperature scale Easy setpoint adjustment with top or bottom access

Regen controls are designed to easily operate the motor in forward and reverse directions without motor lead reversal. A separate set of SCRs is used for each direction. With a regen control, stopping is controlled by using the motor's regenerated voltage sent back to the AC line. Features Field power supply allows use with shunt wound DC motors as well as permanent magnet motors Adjustable accel, decel, current limit, IR comp, min and max speed Current limit indicating LED 5K speed pot for speed control Anti-demag circuit protects PM motors and helps protect the SCR power bridge against ...

Power control centers (PSP models) have been prepackaged to include two 120 Vac grounded convenience outlets as well as a 4 or 10 Amp switch/circuit breaker for controlling the output power. The outlets can be continuously powered or controlled by the switch/circuit breaker (selectable by internal jumper). Auxiliary outputs are provided for convenient panel installations.

This optional smart switch for the AIMS Power™ dual sensing isolator allows for manual control linking the two batteries together with a push of a button. The isolator will manually operate allowing current to flow for 60 seconds without the alternator even if both batteries are below 12.7V. For the Dual Sensing Battery Isolator see part # BATISO300. The Dual Sensing Smart Battery Isolator monitors both the starting battery and the auxiliary. If the unit detects that either battery has exceeded 13.2 volts, then the isolator will connect them. The benefit of the dual control enables ...