Connectors & Links

Forged - Quenched and Tempered, with alloy pin Working Load Limit permanently shown on shackle Hot-dip galvanized Fatigue rated Satisfies ASME B30.26 requirements Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)

Entire clip is Galvanized to resist corrosive and rusting action. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3/16"-7/8" sizes, and 90% for sizes 1" through 1-1/2". Bolts are an integral part of the saddle. Nuts can be installed in such a way as to enable the operator to swing the wrench in a full arc for fast installation. All sizes have forged steel saddles. All Clips are individually bagged or tagged with proper application instructions and warning information. Meets or exceeds all requirements of ASME B30.26 ...

carbon anchor shackle S-209 screw pin self-colored forged-quenched & tempered with alloy pins can be used in tie down, towing, suspension or lifting applications

Used to reinforce eyes of cable assemblies to reduce abrasion. Method of Application: Turn back specified amount of rope from the thimble. Apply the first clip one base width from the dead end of the wire rope. Apply the next clip as near the logo as possible. Turn on the nuts but do not tighten. Space additional clips equally between the first two. Take up rope slack. Tighten all nuts evenly on all clips.

Forged - Quenched and Tempered, with alloy pin Working Load Limit permanently shown on shackle Hot-dip galvanized Fatigue rated Satisfies ASME B30.26 requirements Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)