MSA® G1 30-Minute Cylinder, Threaded Remote Connection, Aluminum, With Air

Features: Kit includes everything needed to perform fit testing on all Moldex respirators. Comply with OSHA standards for qualitative fit testing. Includes: Hood Sensitivity Solution Nebulizer Fit Test Solution Nebulizer Sensitivity Solution (6 - 2.5 mL Ampules) Fit Test Solution (6 - 2.5 mL Ampules) Qualitative Fit Test Instruction Sheet Wallet Respirator ID Cards Respirator Training certificates. Respirators sold separately

Specifications: Sweet taste sensitivity solution for fit testing. Used with the 3M™ Qualitative Fit Test Apparatus FT-10 and 3M™ Training and Fit Testing Case FT-20. Can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter. Used to test the sensitivity of the respirator wearer to a saccharin solution. It is used with the 3M™ Qualitative Fit Test Apparatus FT-10 and 3M™ Training and Fit Testing Case FT-20.

PremAire® Cadet Escape, 10 minute carbon egress cylinder, nylon strap, less fittings, case, and G1 facepiece. This combination supplied-air respirator with SCBA is designed especially for escape. Versatile, comfortable and affordable, it features a single-assembly first-stage regulator and cylinder valve. Includes PremAire® Escape air line respirator, 10 minute carbon egress cylinder, nylon strap carrier/harness. Does not include facepiece, fittings or case.

MSA offers a complete line of calibration gas cylinders to calibrate all instruments. The gas mixture in calibration gas cylinders is certified to be prepared gravimetrically, using NIST traceable weights. Each lightweight calibration gas cylinder is supplied with an individual certificate of analysis and Material Safety Data Sheet (MSDS). MSA certifies that the gas mixture in each cylinder has been prepared gravimetrically, using NIST* traceable weights. Regulators sold separately. Each cylinder lists the PPM or percentage of gas contained within each cylinder.

Features: 8" I.D. Aluminum Tube 31" Overall Height 16" Base with 9/16" Diameter Mounting Holes 5/16" Wall Thickness Does Not Meet NFPA 1901 Standards, Contact Air Systems for NFPA 1901 Compliant Stations For use with AC-60, AC-97, SCBA/SCUBA Cylinders