HK Porter 8690CK Ratchet-type Guy Strand Cutter, 1/2" Cap., 28"L

Hardened Blades allow increased cutting longevity 350° Rotating Head designed to cut at any angle 6lb. tool is 50% lighter than traditional bolt cutters Well balanced in-line tool design improves operator posture when cutting Designed to cut soft steel locks and bolt seals up to 3/8" diameter (Lab Tested to cut TydenBrooks® Snap Tracker Bolt Seals) 6 Ton cutting force eliminates the risk of injury from manual high-force exertion Double-Click Safety Feature helps prevent unintentionally starting a cut LED Light illuminates work area for high visibility 18V Li-Ion 4.0 amp hour battery ...

10-Port Carboy Cap, 70mm (Rieke FS-70 NPS, 8TPI), Complete Kit with (1) 1/2" plug, (3) 1/4" plugs and (6) 1/4-28 Plugs. Fits the 70mm opening on Hedwin® brand drums and carboys, and similar products. Cap thread design is the 70mm threaded Rieke 8TPI (8 threads per inch). Uses 1/4-28 UNF threaded adapters (for 1/16" OD tubing, order part# WF-AQ-1-16. For 1/8" OD tubing, order part# WF-AQ-1-8), as well as 1/4" NPT threaded adapters. Features a single 1/2" NPT port for use with carbon filter WF-CF-100KIT (not included). Includes the Following Parts: WF-FS70-10: 70mm Cap, 10-port with (1) ...

Features: Tools complete with Tools@Height attachment Point Diamond-shaped, flat top jaw serrations hold wire firmly and resist nicking material being worked on Diagonal nose configurations & "mini" frame allows access in tight quarters Automatic return feature retracts automatically, speeding up operation use and reducing operator fatigue Heat-treated cutting edge holds it edge for cutting tough (up to 1/16") stainless steel and safety wire One hand operation allows for operator closing and locking with minimum of handle force High carbon alloy steel forging are used for maximum ...

Insulated hand tools from Jameson provide maximum electrical protection and are suitable for working live or close to live parts at nominal voltages up to 1,000 volts. Constructed using heavy-duty injection molded Nylon 11; the 26-inch insulated long-arm cable cutters are ideal for use in a wide variety of utility, electrical, and telecommunication applications. The 26 in. Long-Arm Cable Cutters are suitable for cutting Al/Cu conductors up to 1,250 MCM (630 mm2) Stranded and 2 AWG (35 mm2) Solid. Features: 26 inch Long-Arm Cable Cutters Suitable for cutting Al/Cu conductors up to 1,250 ...

Features: For cutting copper and aluminium cables, single and multiple wire All tools 100% tested and meet ASTM F1505 and IEC 60900 requirements Not suitable for steel wire and wire ropes Clean and smooth cut without crushing and deformation One hand operation using ratchet principle Little handforce required due to very high transmission ratio