ReadyTrace™ Downspout Cable Hanger For Standard Cable Installation & Roof Snow Removal

This wire provides portable use to electric blowers. The 4/3 SOOW type cord is ready for direct wire attachment. It is Rohs compliant, UL listed and CSA certified for indoor and outdoor use. This product has limited warranty of 1 year.

Pipe Mounting Kit (PMK) 12" Frame-Particularly useful in buildings with insufficient structural strength to use other types of mounts. Requires 3" (76 mm) pipe (3½" / 89 mm O.D.) (not supplied). Mounting kits are made of steel with wet-applied enamel paint. If the heater is installed on a structure that is to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs (136 kg). Not suitable for models - HP 30, FR 30, HP 36, FR 36, or Tandem AH Series (24B fan configuration). Although Ruffneck™ Unit Heaters are designed to ...

Improve heat distribution from your Dyna-Glo wall heater with Dyna-Glo's Vent Free Wall Heater Fan. Operate on manual mode if you'd like your fan always ON. Operate on AUTO MODE if you'd like your fan to operate ONLY when it will blow warm/hot air. This Dyna-Glo Vent Free Wall Heater Fan fits all Dyna-Glo vent free wall heater's 10,000 BTU's and above. This unit requires a 120V grounded outlet.

Basic Mounting Kit (BMK) 16" Frame - The BMK is suitable for applications where the support arm can be bolted or welded directly to structural steel or concrete. Mounting kits are made of steel with wet-applied enamel paint. If the heater is installed on a structure that is to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs (136 kg). Not suitable for models - HP 30, FR 30, HP 36, FR 36, or Tandem AH Series (24B fan configuration) Although Ruffneck™ Unit Heaters are designed to be installed in an upright and ...

Solaira™ Omnis 90 Amp variable phase angle control, multi-Voltage 120 or 208/240 volt, up to 90A total load. Includes Nema 1 Vented enclosure and low voltage Potentiometer included. For variable control of single heater load with optional inputs including 0-10dCV, 4-20mA, Building Management systems including Lutron, Crestron, Control 4 and others. Optional Timer, Occupancy Sensor, thermostat. It is Made up Of Circuit Board Material.