Mitutoyo 101461 Dial Gage Stands

Fowler® Chrome Flex Mag And Indi-X Blue Electronic Indicator Set Fowler® Chrome Flex Mag And Indi-X Blue Electronic Indicator Sets include an Indi-X Blue Electronic Indicator, a Flex Arm Mag Base and a Magnetic Indicator Back. The Indi-X Blue Electronic Indicator has a 2-1/4" dial face, a 1"/25mm travel, tolerance indicators, absolute/incremental reading, floating zero, an auto Off feature, a carbide tipped point, lug back and 3/8" stem mountings. The Flex Arm Mag Base has a corrosion resistant chrome plated flex arm, an 85 lb. pull magnet and a V-base for mounting on rounded surfaces. ...

The Starrett® Shaft Alignment Clamp is designed for fast, precise alignment of motors, pumps, compressors, etc. This system is capable of addressing radial and angular misalignment problems and can be set up within minutes. Features: Lightweight clamp design made of black anodized aluminum Rigid 3/8" diameter stainless steel indicator posts provided in three lengths (5", 7-7/16", and 9") Extension plate allows for added radial clearance Heavy-duty roller chain can accommodate up to a 7-1/2" diameter shaft Set comes with two Starrett® 196B5 Indicators Excess roller chain can be secured to ...

The Starrett® 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to ...

The Starrett® 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to ...

Fowler® 52-585-155-0 X-Proof Water Resistant Indicator Set Magnetic Base: Fine adjustment Base dimensions: 2" x 2-11/32" x 1-13/16" Also mounts test indicators with 1/4" post 85 lb. pull On-Off lever release magnet V-base for placing on round surfaces X-Proof Indicator: Travel: 1" Reading: .001" Continuous reading: 0-100 Tolerance markers AGD Group 2, 2-1/4" dia. Lugback and carbide point Robust, shockproof design Rubber bellows on stem O-ring seal on safety cap O-ring protection for bezel and rotating dial Sealed back plate