General Wire Coupling Wrench with L-Connector

General Pipe Cleaners Electric Floor Model Machine w/ Power Feed, 100' x 3/4" Cable & Cutter Set The Speedrooter 92 has root cutting power plus the ability to do small drain work. For smaller lines, you switch to a drum that holds 1/2" cable (available separately), a job that takes less than a minute. Just loosen three knobs, swing the motor to the side, and lift off the drum. The power cable feed drives 3/4", 5/8", and 1/2" cables and has the pulling power to get your cable out of the line even on long, tough jobs. To adjust for 3/4" or 5/8" cables, you simply turn the knob on top of the ...

Looking for a cleaner way to clean drains? The Model DRZ-PH with automatic feed is the answer. Light and powerful for its size, this compact drain cleaning machine is ideal for clearing clogged sinks, tubs, and laundry drains in 1-1/4" to 3" drain lines up to 50 ft. long. The variable speed power cable feed gives you complete control as it feeds and retrieves the cable at up to 16 ft per minute. The four foot guide tube means you never have to touch the cable – so your hands, and the jobsite, stay clean. No need to wear your arms out holding a heavy machine over the drain or under the ...

General Pipe Cleaners Sectional w/ (10) 10'x1-1/4" Proflex Cables w/ G Connector, Cable Feeding Tool & Cutter Set This machine is almost as easy to run as a lawn mower. You push eight foot (available separately) or ten foot (included with this package) cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line. The ...

General Pipe Cleaners Sectional Machine w/ (6) 7-1/2'x5/8" Cables, Small Cable Carrier & Cutter Set The Root 66 is a real advance in sectional cable machine design. No mid-range machine has its versatility and power. Look at its versatility. You can drive 5/8" cables for lines up to 3" and 7/8" cables for 4" lines - and you can switch from one to the other in seconds, without touching the jaws, without an adapter, without tools. And for sink drainwork, slip on a drum that holds smaller cables (available separately). To operate, just feed a cable into the line and slide the back end into ...

General Pipe Cleaners 6 Piece Cutter Set for I95 & Root 66 Machines (7/8" cables) (R-SHD-10) Spear Head. (R-HA-10) Hook Auger - For breaking up stoppage and retrieving. (R-2UC-10) 2" U-Cutter - For cutting and scraping. (R-3UC-10) 3" U-Cutter - For cutting and scraping. (R-RTR-10) Corkscrew Retrieving Tool - For removing loose objects. (R-CK-10) Coupling Key