Process Station, 48"W x 23"D x 72"H, 6 Cylinder Capacity

Bench Mount Bracket, 8"W x 4"D x 4-1/4"H, 1 Cylinder Capacity All steel construction bench mounted brackets Holds one cylinder from 4.0 to 12.0 inch diameter All steel, finishing, packaging, and labor made 100% in the USA and Canada Mounts to bench or table tops using dual 3/8 inch diameter swivel pad faced clamping posts with screwdriver slots for attaching to tables and benches. Clamps to tables 1 to 2.75 inches thick Vinyl grip pads help assure firm attachment Constructed from 11 Gauge hot rolled steel Edges are protected with steel reinforced vinyl edge guarding to help maintain your ...

Commonly used for medical oxygen or calibration gases in laboratories, this ring stand uses 0.375-in (10-mm) nylon set screws to hold cylinders from 5.75- to 6.75-in (146- to 172–mm) in place. Constructed using steel with corrosion-resistant powder coating, the stands include mounting holes for permanent installations. Helps comply with OSHA, NFP1, NFPA 55, and CGA.

Gas Cylinder Truck - Move bulky gas cylinders by hand with this heavy-duty steel truck. Thick 7 gauge deck is reinforced with 1-1/2" square tubing and substantial 7 gauge gussets. Square tube uprights support 1/4" thick corral dividers. Heavy duty chain secures the cylinders during transport. 2 swivel and 2 rigid casters with 8" phenolic wheels. Loop handle at swivel end. Overall height (empty) is 48".

Two Cylinder Floor/Truck Stand with Locking Ring System: This model includes the features found on our standard cylinder rack (see Model G-275) and adds the vise-like holding capability of the Justritety cylinder locking ring system. With use of safety cylinder caps (Models G-2501-2504 or DOT standard caps), this unit makes an ideal system for over-the-road cylinder transportation. Welded and powder painted 11 gauge steel construction. Accommodates two cylinders from 4.0 to 10.0 inch diameter. Specify high pressure or low pressure for correct locking ring size. 40x14x36" 48 lbs.

Single Cylinder Floor/Truck Stand with Locking Ring System: This model includes the features found on our standard cylinder rack (see Model G-275) and adds the vise-like holding capability of the Justritety cylinder locking ring system. With use of safety cylinder caps (Models G-2501-2504 or DOT Standard caps), this unit makes an ideal system for over-the-road cylinder transportation. Accommodates single cylinders from 4.0 to 10.0 inch diameter. Specify high pressure or low pressure cylinder for correct locking ring size. 21x19x36" high 39 lbs.