Vertical Plate Clamp with Chain Lifting Attachment CPC-20 2000 Lb. Cap.

Jib Boom Kit-30 Lb. Cap. 3 Ft. Swing Boom on 4 Ft. Column Jib kites feature either fixed or swing booms mounted on vertical columns. The boom may be adjusted vertically higher or lower on the column to suit your specific application. Vertical columns are typically 4 ft. (1.2m) for bench mounting and 7 ft. (2.1m) for mounting on the floor. If floor mounting, the optional support clamp (WS50-SC) fastened to wall or back of bench is recommended.

Camlok CY Hinged Universal Plate Clamp, 450-2200 Lbs., 0"-3/4"Jaw Hinged hook ring enabling the clamp to be used at any angle Fitted with a cam operated closing mechanism that can be replaced with a chain pull open/close mechanism Fitted with hardened serrated teeth jaws and pads that are suitable for gripping steel

The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating clamp's rated capacity. Model JPA incorporates a pivoting shackle that permits side loading of the lifting shackle at 100 percent of rated capacity from vertical to 30 degrees, 75 percent of rated capacity between 30 and 45 degrees and 50 percent of rated capacity between 45 and 90 degrees. Made In The USA.

Plate Clamp, Hinge Top, 0-1.5", 11,000 LB WLL, , is manufactured to exceed all ASME B30.20 and OSHA regulations. Powder coated safety yellow for increased visibility, proof loaded and shipped with certification paperwork. Made in USA.

PALTE CLAMP, HINGE TOP, 1.5"-3", 11,000 LB WLL, is manufactured to exceed all ASME B30.20 and OSHA regulations. Powder coated safety yellow for increased visibility, proof loaded and shipped with certification paperwork. Made in USA.