National Safety Apparel® Waterproof Elbow Length Cryogenic Glove, Large, Blue, G99CRBEPLGEL

ArcGuard® Class 0 Rubber Voltage Gloves, Black, Size 12, DWH11012 Features: Newly tested and stamped with test date Must be put into use within 12 months of the test date Once Gloves are issued for use, they must be tested wihtin 6 months from the date they were distributed to employees Should be worn with 10" leather glove protectors. Leather glove protectors are not required to be marked with a date Standards: NFPA 70E-2015 Compliant for Arc Flash CSA Z462-15 Compliant for Arc Flash (Canada) Meets ASTM D120, Class 00, Type 1

Features: Arc Rating: N/A Fabric/Material: 16 oz. Aluminized Rayon Provides thermal and cut protection Aluminized back provides radiant heat and molten metal protection Wool & cotton duck lining Straight thumb Thermal leather palm & front cuff Leather patches on palm & knuckles Snap adjustment at cuff Compliance: Arc Rating: N/A ANSI/ISEA 105 Heat Level 6 ANSI/ISEA 105 Cut Level 3

The ProFlex® 7951 Cut-Resistant Protective Arm Sleeves are designed with aramid fibers that offer both ANSI/ISEA 105-2016 level A5 cut protection and EN 407 level 1 heat protection when handling hot materials (212°F // 100°C for up to 15 seconds). Crafted with both a pre-curved design and flex zones in the elbow, these arm sleeves make for a natural and comfortable fit. They also feature a soft neoprene thumb loop and adjustable arm straps to ensure a secure fit that leaves no part of the arm exposed to potential cut hazards. The aramid fiber is tested to ANSI/ISEA 105-2016 ...

MAPA® Cryoket 400 Waterproof Cryogenic Gloves, 16"L , 1 Pair, Size 11, CRYKIT400411 Cryogenic 400, Cryogenic Gloves. Waterproof comfortable Cryogenic Gloves that offer dexterity in very low temperatures. Interior insulated polyester multilayer fleece provide protection in cryogenic environments. Inner Polyolefin Porelle membrane keeps hands dry while allowing air to flow. Special elastic laminated blue fabric provide dexterity and comfort. Suitable for applications handling liquid nitrogen and other cryogenic gases to protect from cold contact and prevent burns from liquid gas leakage. ...

ArcGuard® Class 0 Rubber Voltage Gloves, Black, Size 8, DWH1108 Features: Newly tested and stamped with test date Must be put into use within 12 months of the test date Once Gloves are issued for use, they must be tested wihtin 6 months from the date they were distributed to employees Should be worn with 10" leather glove protectors. Leather glove protectors are not required to be marked with a date Standards: NFPA 70E-2015 Compliant for Arc Flash CSA Z462-15 Compliant for Arc Flash (Canada) Meets ASTM D120, Class 00, Type 1