Circuit Tracers

Features: Simple, versatile, and user-friendly design Rugged, compact, and splash proof copper housing Three operation modes available: CW (Continuous wave output), Pulse and Off modes Continuous wave output mode (CW) for steady fault illumination Pulse mode helps to locate faults under high ambient light conditions Support 2.5mm connectors (for PC/FC/SC/ST) The button switch permits easy one handed operation Handy, pocket pen design 2 AAA-size alkaline batteries provide 50 hours of continuous operation

Gardner Bender Outlet Tester, 120 Vac Tests standard receptacles to ensure proper wiring. Features: Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded recepticle (110 - 125 V AC circuits). Test for six circuit conditions: open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, and correct wiring. Succession of yellow and red lights provides indication of circuit status or specifies wiring errors. Easy-to-read three views - top, side and bottom. Tests: Standard outlets, Extension cords.

Features: There is only one way to troubleshoot problem components in a heavy-duty power steering system: a flow and pressure reading meter. OTC' No. 5079 measures both: 1 to 10 gallons oil flow and up to 3,000 psi of pressure When connected in line, this universal analyzer will isolate the failed components in just minutes. There is no wasted time as in trial and error methods The set is complete with high pressure hoses, 9/16"-18 standard fittings, and quick disconnect couplers to handle Eaton/Vickers, TRW, Ross, and Shepard power steering systems Weight: 6 lb

The SP-101 grounds a person wearing an ESD wrist strap and also analyzes the grounding correctness of a single operator and wrist strap through a 3 prong, 120 volt power receptacle. Features: Easy to plug in a banana plug terminated wrist strap Grounding plug has a convenient user friendly shape Tough impact-resistant high polymer is ultrasonically welded for added water protection Hard ground to an electrical system drains charges from the wearer Friendly field service tool makes receptacles/workers/field service kits grounded properly High visible long-life LED indicator lights provide ...

Used by field service technicians when working on static sensitive devices. It comes with a static dissipative surface, ground cord, wrist cord, wrist strap and alligator clip. It can also be used as a Faraday cage to transport circuit boards and static sensitive parts. Features: Used to repair and ship circuit boards in the field safely Conforms to ESD 20.20-2007 and EU Standards Includes NIST traceability Static dissipative blue 24" x 24" fabric reinforced PVC Flame retardant, easy to clean, antimicrobial Includes to pockets and VELCRO®Brand closure Includes patented Ohm-Stat™ ...