Fan Controls

Features The Remote Indoor Temperature Sensor is used to sense temperature remotely Used to sense temperature if the thermostat is installed in a poor temperature sensing location Small remote temperature sensor to match any room decor Easy to install and use Factory calibrated; no field calibration required Works with a maximum 200 foot wire run

Features The Wireless Indoor Sensor(s) is used to change the sensing location of the thermostat Works with RedLINK™ 2.0 thermostats Sense temperature and humidity remotely Average temperature Control temperature and humidity in separate locations Humidify and dehumidify in separate locations. For example, humidify on the main level and dehumidify in the crawl space Up to 6 Wireless Indoor Sensors per thermostat

Honeywell Mechanical Temperature Controller T6031A1029 Remote Bulb -30 to 90°F, Refrigeration, Heat & Cool Features: For modulating control of water or air temperature in ducts, tanks and similar applications Fast response models (for duct mounting) have coiled sensing element giving at least four times faster response than standard models Ambient temperature compensated for the case and tubing Sensing element capillary tubing allows remote mounting of sensing element Setpoint may be read and adjusted through cover Throttling dial inside case adjusts proportional throttling range ...

The Round Mercury Free Thermostat W/ Manual Changeover Rwy The Round Mercury Free Thermostat W/ Manual Changeover Rwy has a manual changeover and can heat conventional systems and heat pumps with no auxiliary heat. Features battery assisted power stealing, 24V Heat Only 40-90F, and Relay Switch. Color finish is Premier White.

Fantech Electronic Timer RTS5 - 20/40/60 The RTS5 is compatible with Fantech Flex 100H, VHR70R,VHR100R, VHR150 and VHR150R. The push button activates the system to run in continuous mode for 20, 40 or 60 minutes, it then returns to the predetermined setting. To cancel this operation, simply press the button a fourth time.