Transmission Jacks

This Hydraulic long ram is designed to lift, not support, rated capacity loads. This ram is intended to be used with corresponding Blackhawk Automotive engine cranes. Immediately after lifting, the load must be supported by mechanical means. For air option model, ensure that air source can dedicate 7.8 CFM @ 110-175 psi to each ram operated Features: Hydraulic system is protected from internal damage by a patented by-pass mechanism Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance Fabricated from hard-cast steel with heat-treated ...

Two stage telescopic ram designed for medium duty transmissions, transfer cases, and differentials. Double pump hydraulic system for quick lift operation. Powder coat finish provides resistance to corrosion, chemicals, and scratches. Chrome plated pump core and piston rod reduces friction and provides long service life. Adjustable saddle with corner bracket and safety chain. Capacity: 2,000 Lbs. 1 Year Limited Warranty.

Innovative patent-pending design; clamps directly to pinch welds to prevent slippage during use.Independent units eliminate the need to adjust dolly width for different vehicle designs.Each unit has an independently adjustable threaded lift saddle with rubber pads to protect the vehicle frame.Universal design for use on all vehicle types without additional adapters.Provides easy movement of an FWD vehicle after removal of the drive train.5 in. polypropylene casters.Each unit has a capacity of 1800 lbs. (3600 lbs., pair) with a low height of 9 in. and a high of 14 in..May be used with or ...

Pump handle rotates a full 360 degrees for use in any position. Flash-chromed ram inhibits rust from entering the hydraulic system. Features and Benefits: Universal mounting head with adjustable brackets, tilts front to back and side to side Height range: 6-1/2" to 29-1/2" Safety chains hold the load securely even while moving about the shop Wide wheel base with four swivel casters, and two handle grips make it easy to position under the vehicle Safety overload prevents use beyond its rated capacity

These Automotive Hydraulic Bottle Jacks are designed to lift, not support, rated capacity loads consisting of one end of a vehicle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands. Features: 8 Ton Capacity Hydraulic system is protected from internal damage by a by-pass mechanism Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance Fabricated from hard-cast steel with heat-treated critical stress areas Unique cross-type forged release valve assures positive load control Wide rugged base ...