Insize Styli For Dial Test Indicators, 1/8" Stem Dia.

The Starrett® Shaft Alignment Clamp is designed for fast, precise alignment of motors, pumps, compressors, etc. This system is capable of addressing radial and angular misalignment problems and can be set up within minutes. Features: Lightweight clamp design made of black anodized aluminum Rigid 3/8" diameter stainless steel indicator posts provided in three lengths (5", 7-7/16", and 9") Extension plate allows for added radial clearance Heavy-duty roller chain can accommodate up to a 7-1/2" diameter shaft Set comes with two Starrett® 196B5 Indicators Excess roller chain can be secured to ...

The Starrett® 657AA Magnetic Base Indicator Holder is for use with all Starrett® Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers. Features: For use with all Starrett® Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators Accommodates similar indicators of other manufacturers Includes magnetic base with all attachments: upright base post, two snugs, rod, and indicator attachment

The Starrett® 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to ...

Fowler® 52-585-155-0 X-Proof Water Resistant Indicator Set Magnetic Base: Fine adjustment Base dimensions: 2" x 2-11/32" x 1-13/16" Also mounts test indicators with 1/4" post 85 lb. pull On-Off lever release magnet V-base for placing on round surfaces X-Proof Indicator: Travel: 1" Reading: .001" Continuous reading: 0-100 Tolerance markers AGD Group 2, 2-1/4" dia. Lugback and carbide point Robust, shockproof design Rubber bellows on stem O-ring seal on safety cap O-ring protection for bezel and rotating dial Sealed back plate

The Starrett® 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to ...