Extech TL831 Industrial Test Lead Set, Stainless Steel, 42"L

Stainless steel probe pierces insulation on 14, 16 and 18 gauge wire. You control needle depth to minimize insulation damage. Essential for use under hood or under dash. Use it on fuel injectors or sensors while providing complete insulation to grounding due to design. The TP81 connects to banana jack leads (such as Fluke'€™s TL224).

K-type pipe clamp temperature probe for hands-free superheat/sub-cooling temperature measurement without the use of tape or VELCRO®Brand. Spring-loaded jaw for secure grip on pipes from 0.25 In. (6.35 mm) up to 1.5 In. (38 mm) diameter. For use with any thermometer or MultiMeter with a type K thermocouple input. Measurement range: -4 to 200°F (-20 to 93°C). Complete with: 36 In. Cable Type K connector VELCRO® is a registered trademark of Velcro BVBA, used with permission.

Battery operated million meter has 5 ranges and measures down to 0.1 millions. Measurements are displayed on a large, 2000 count LCD. Additional features include over-temperature and over-voltage protection, auto-hold, auto power off and invalid test indicators to prevent inaccurate measurement. Unit is housed in a built-in water resistant case. Complete with: 8 x AA batteries 2 sets of test leads(4-wire with 4 alligator clips and 4-wire with 2 kelvin alligator clips)

AC Milliohmmeter checks battery condition in seconds - while the battery is in service. Built-in datalogger stores up to 999 tests which can be downloaded to a PC using the included software. Complete with: Kelvin Test leads and clips 6 X AAA batteries Software with interface cable

Extech TP870 Bead Wire Type K Temperature Probe, Type K, Stainless Steel, 1.5"L Bead wire type K temperature probe (-40 to 482°F) is compatible with most test instruments that have a type K temperature input.