Werner® Friction Bolt Anchor

The Werner A510023 Bolt is a fastener for the 10K Mega-Swivel D-Ring into the A510021 Straight Loop Insert. It has a Minimum Breaking Strength (MBS) of 10,000 pounds and includes the bolt and washer. The bolt meets ANSI Z359.18-2017 and OSHA 1910.140 and 1926.502 requirements.

The Werner A311000 EVO Anchor is a 5K removable anchor that utilizes the Remote Grab System (RGS). The RGS allows the user to install the EVO Anchor before leaving the safety of the ground. The RGS can also be used to remove the anchor from the ground after the job is done. The EVO Anchor requires a pre-installed receptacle that is cast-in-place during construction of the surface.

The Werner A510022 10K Mega-Swivel with Straight Loop Insert Bolt attaches to the Werner A510021 Straight Loop Insert that was cast-in place during construction of the surface. The Mega-Swivel is made of steel and plated for corrosion resistance. Includes 5/8-inch bolt and lock washer. The Mega-Swivel design allows full range of motion.

The Werner A410000XB Toggle Bolt anchor with 2-inch swiveling forged D-Ring connector is an easy to install and remove anchorage for Hollow Core Concrete and Steel applications. A pre-drilled hole of 3/4-inch allows the toggle anchorage to be inserted and have the back flange provide a multi-directional anchorage.

The Werner A515000 Reusable Anchor with 2-inch swiveling forged teardrop D-ring is a lightweight, easy to use bolt providing convenient anchorage in concrete. The anchor requires a pre-drilled hole of 3/4-inch and 3-1/2-inch minimum depth in 3000 psi concrete. It can be used in any direction as a fall protection anchor and is reusable with its easy to insert and remove design. This features a blue trigger and hole plug for easier removal.