Liberty Pumps LE41A 4/10 HP, 115V, 19FT Shutoff, 100 GPM, 2" Discharge Sewage Pump

AMT 5767-95 CI Submersible Shredder Sewage Pump, Double Mechanical Seal, 4" Out, 5 hp, 3 Phase Motor AMT Submersible Shredder Sewage Pumps feature an enhanced spiral shredder mechanism plate and carbide tipped impeller to prevent clogging and reduce maintenance when cutting through stringy, fibrous and sludge type waste. Applications include: sewage pumping stations, septic tanks, sewage treatment plants, dirty water drainage, flood and emergency. Motors are rated continuous duty and single phase models have thermal overload protection. Minimum liquid requirements must be above 85%. ...

Zoeller Waste-Mate M267 Submersible Sewage Pump, Auto Eject with Built-in Float Switch 1/2 HP For residential, commercial or industrial Sewage/dewatering. Passes 2 in. spherical solids. Dewatering and effluent sump pumps are not designed for use in pits handling raw Sewage. Pump installation and servicing should be performed by a qualified person. Corrosion-resistant, powder coated epoxy finish. Float operated, submersible (NEMA 6) 2-pole mechanical switch.Durable cast construction, ASTM Class 25 cast iron, switch case and pump housing. Cast iron base on models 267 and 268. 2 in. female ...

AMT Cast Iron Sewage/Trash Pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N o-rings and check valves. The built-in check valve allows pump to re-prime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, ...

Zoeller E284 Waste-Mate non automatic submersible Sewage or dewatering pump. This pump has 2" NPT discharge which passes 2" spherical solids. The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps. Consult factory for special applications. No sheet metal parts to rust or corrode - Stainless steel screws, bolts, float rod, handle, guard and arm and seal assembly - Shaft seal - Carbon and ceramic rotary face seal, with stainless steel wetted parts - ...

The K2® 1/2 HP Submersible Effluent Pump is designed to pump effluent, wastewater, or flood water that contains solids up to ¾ inches. The pump is designed to fit into an 18 inch diameter or larger basin. The pump includes a piggyback tethered float switch for reliable maintenance-free for automatic or manual operation and is easily replaced. Features: Heavy-duty cast iron construction maximizes pump life 2" Quick Connect Fitting eliminates the need for PVC primer, glue or plumber's tape Non-clog vortex impeller handles up to 3/4" solids Energy-efficient PSC motor with automatic reset ...