K2® Contractor Series Sewage Pump, Cast Iron Base, 1 HP, 183 GPM

Zoeller M292 automatic High head waste-mate submersible Sewage or dewatering pump. This pump has 2" NPT discharge which passes 2" spherical solids. Integral float operated mechanical switch, no external control required. The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles. Durable cast iron constructed switch case, base, motor and pump housing - No sheet metal parts to rust or corrode - All cast iron class 25-30 25000# tensile strength - Stainless steel screws, bolts, float rod, handle, guard, arm ...

Zoeller N270 Waste-mate non automatic submersible Sewage/effluent or dewatering pump. This pump has 2" NPT discharge which passes 2" spherical solids. The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps. Consult factory for special applications. Not affected by materials normally found in drainage and Sewage sumps - Stainless steel screws, bolts and handle - Corrosion-resistant, powder coated epoxy finish - Minimum recommended basin size (small load ...

Zoeller E284 Waste-Mate non automatic submersible Sewage or dewatering pump. This pump has 2" NPT discharge which passes 2" spherical solids. The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non automatic pumps. Consult factory for special applications. No sheet metal parts to rust or corrode - Stainless steel screws, bolts, float rod, handle, guard and arm and seal assembly - Shaft seal - Carbon and ceramic rotary face seal, with stainless steel wetted parts - ...

AMT Cast Iron Sewage/Trash Pumps are designed for trouble free and economical handling of solids laden liquids and slurries. Cast iron construction with two vane stainless steel self-cleaning impellers, silicon carbide mechanical seals for abrasion resistance and Buna-N o-rings and check valves. The built-in check valve allows pump to re-prime automatically in an open system without the foot valve. The solids handling capabilities of the pumps make them ideally suited for a variety of industrial applications including: sewage treatment, canneries, chemical processing, wineries, tanneries, ...

The K2® 1/2 HP Submersible Effluent Pump is designed to pump effluent, wastewater, or flood water that contains solids up to ¾ inches. The pump is designed to fit into an 18 inch diameter or larger basin. The pump includes a piggyback tethered float switch for reliable maintenance-free for automatic or manual operation and is easily replaced. Features: Heavy-duty cast iron construction maximizes pump life 2" Quick Connect Fitting eliminates the need for PVC primer, glue or plumber's tape Non-clog vortex impeller handles up to 3/4" solids Energy-efficient PSC motor with automatic reset ...