Shrinker Stretchers

The versatile SW-22M-P combines the capabilities of 2 machines, the manual sheet metal punch HP-160 and the manual ironworker SW-22M, in one. This solidly-built manual punching and shearing machine will save space in any small shop. Shear station cuts angle iron, flat bar, T-bar, solid round, and solid square stock of varying thicknesses. Includes 9 round punches and dies: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", and 5/8". Back-stop lets you easily deliver repeatable results for light production work. Material hold-downs ensure straight, clean shearing and punching. Gear ...

This model is a Scratch and Dent version with minor paint damage only. Operates as normal but can be sold as new, our loss is your gain!With its sturdy plate steel construction and piston-style hydraulic pump, this hydraulic H-frame press offers one of the best values on the market. 30-ton capacity. 27.5" working width. 5.74" diameter cylinder with 9.8" stroke. 3 hp motor runs on 200-volt single-phase power. Cylinder can move left and right within the frame to deliver pressure at the point where you need it for off-center projects. Comes standard with a pressure gauge. Includes 2-piece ...

Need to shear stock on a budget? This manual ironworker offers many features of a full-fledged hydraulic ironworker—for a fraction of the cost and footprint space. Shears 5/8" solid square, 5/8" solid round, 4" x 3/8" flat bar, and angle iron of varying thicknesses. Gear transfers power from your arm to blades via the sturdy handle. Includes material back stop to help you make repeatable cuts for light production work. Made from fully-welded plate steel to prevent flex and maintain accuracy. Compact to suit small fabrication shops. Backed by a 1-year parts warranty and lifetime ...

The HSP-30A pneumatic shop press offers the same high-value features and steel construction of our HSP-20A—but with 30 tons of force! 21.653" working width. 5.9" cylinder stroke. Industrial-grade hydraulic parts ensure smooth, dependable use for years. Cylinder can move left and right within the frame, depending on orientation of the job. You have the option to work the HSP-30A manually, if you need finer control. Comes standard with a set of V-blocks. Rigid, fully-welded steel main frame eliminates flexing at full force to deliver accurate results. Typically in stock for fast ...

Simple to use, this hydraulic press brake shows the encoder-controlled bend depth and back gauge positions on separate DROs. A heavy steel frame ensures reliable production. Powerful, Easy-to-Learn Hydraulic System Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production 2 encoder-controlled hydraulic cylinders move the top beam Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time It takes a just few seconds to change the top beam pressure and ...